Analoge versterkers

Analoge versterker type CPJ

Type: CPJ

Available as a single board, on a DIN rail mounting or in an IP65 box
Supplied with 24VDC
Supplies up to 4 strain gauge load cells
+/- 10V 0-10V or 4-20mA analog output Auto-calibration signal available
Bandwidth up to 20 kHz
Customized filtering 0.5 ... 450 Hz
CPJ 2S : 2 set points on relays 55 V / 0.4 A

Digitale versterker type BA660

Type BA660

internal resolution 24 Bit
measuring range: 0,1 mV/V ... 7 mV/V
4- or 6-wire connection
voltage supply 9 ... 36 V (galvanic isolated)
programmable filter: 0,8Hz ... 2kHz 
serial outputs RS 232 or RS485  and profibus (Ethernet interface in preparation)
programming via Laptop
Trigger input for zero point adjustment 
Output: 0 (4) ... 20mA or  0 ... +/- 5V or 0 ... +/- 10V
DIN rail mounting

Datasheet meetversterker BA660

Analoge versterker type MV50

Type: MV50

for DIN rail mounting
voltage supply 18 ... 30 VDC
bridge supply 10 V ( 6 load cells à 350 Ohm max. )
6 - wire - technique
voltage output -10 V ... + 10 V
current output 0(4) ... 20 mA
several safety control circuits

Datasheet MV50 on request

Analoge versterker type GSV-1A

Type: GSV-1A

Meetbereik: 2mV/V; optioneel: 1mV/V of 3,5mV/V
Brugvoedingsspanning: 5V
Nauwkeurigheidsklasse: 0,1
Uitgangssignaal:  ±5V ( ±10V); optioneel: 4-20 of 0-20mA
Benodigde voedingsspanning: 12V ... 24V


Datasheet GSV-1A

Analoge versterker type PR1591

Type PR1591

High precision analog transmitter for all kinds of industrial weighing, batching and level control applications
Standard analog outputs 0-10 V and 0/4-20 mA
6-wire load cell interface
PowerS.: 24 VDC/AC to NAMUR ±15VDC; 110/220 VAC
Intrinsically safe versions (galvanic isolation)CENELEC-approval [EEx ib] II B/C
Simple to commission and to calibrate
Adjustment easily accessible via the front
No interaction between zero and span
Mechanically and electrically compatible to former versions PR 1590/6x and SGT 750
Long term and temperature stable

Datasheet PR1591

Analoge versterker type GSV11

Type : GSV11

Analoge versterker voor wegingen.
Standaard analoge uitgangen 0-10 V / 0-5V en 4-20 mA
Voeding : 20-28 VDC
Eenvoudige calibratie
Makkelijk aan te sluiten
Ook als losse print te verkrijgen

Datablad GSV11

Analoge versterker type MP20

Type: MP20

Linearity better than 0.01% of full scale
Analogue outputs 0/4 to 20 mA and 0 to 10 VDC simultaneously usable
Four load cells of 350 Ω can be powered
Active low pass filter from 0.25 Hz to 32 Hz
Supply voltage 12-24 V or 110 VAC/230VAC via MP 20/20
Zero offset upt to +/- 80% of full scale
Input signal range up to 3.3 mV/V
Easy calibration
Easy mounting by using Phoenix DIN rail module

Analoge versterker type MV320

Type: MV320

voltage supply 115 / 230 VAC or 24 VDC
DC - amplifier with differential input
bridge supply 10 V ( 4 load cells à 350 Ohm max. )
2 adjustable set points ( relay outputs )
voltage output - 10 V ... + 10 V
current output 0(4) ... 20 mA

Datasheet MV320 on request

Analoge versterker Type : MV332.2

Type : MV332.2

Hoog nauwkeurige en stabiele analoge versterker
Meetbereik: 0,16 ... 2,2 mV/V
Voedingsspanning: 10V
6-draadsaansluiting
Analoge uitgangen 0 ...+/-10 V en 0/4 ...20 mA 
2 instelbare schakelpunten 
Voeding : 220 VAC of 24 VDC ;
Eenvoudige calibratie
Makkelijk aan te sluiten

Datasheet - Manual MV33

Redundante 2-kanaalsversterker type : MV281

Type : MV281-N27

redundante 2-kanaalsversterker met diverse bewakingsfuncties, zoals:
- overbelasting
- wegvallen signaal (slap koord)
- controle op gelijklopen beide kanalen
- bewaking voedingsspanning
uitgangen met veiligheidsrelais
meetbereiken: tot 2 mV/V
standaard analoge uitgangen 0-10 V en 4-20 mA
Voeding : 24 VDC
TUV certifcaat voor MV281 
Service unit voor snelle inbedrijfstelling

nadere Informatie: op aanvraag

Indicator Type AE903

Type : AE903

Gevoeligheid : 0,5...4,0 mV/V
Combined error : 02...0,5 %
Level of protection : IP 40
Range : -19999....19999
Aantal loadcellen : 2
Digitale interface : RS232
Meetsetpoints : 2

Precisie versterker type DK710

Type DK710

DC - amplifier with differential input
display range 19 999 divisions / LED (height of figures 13 mm)
supply voltage 115 / 230 VAC or 24 VDC
bridge supply 10 V ( 6 load cells à 350 Ohm max. )
2 Opto-outputs "empty" and "overload" ( adjustable by potentiometer )
analog output ( voltage and current )
display range, steps (1, 2, 5, 10) and decimal point (can be parametrised by switches behind the front panel)
Pls. note: In all applications needing an analog output, this instrument is highly recommended.
               The analog output is directly derived from the input signal and follows quickly and without any steps

Datasheet DK710 on request

Analoge indicator  type FA 192 / FA 288

Type FA 192 / FA 288

front dimensions 192 x 192 mm or 288 x 288 mm
high precision DC amplifier with differential input
voltage supply 115 / 230 VAC
bridge supply 10 V ( 6 load cells à 350 Ohm max. )
2 set points standard, one more optional
analog output - 10 V ... + 10 V; free output potentiometer optional
2 - range - version optional
EU - approval
A big collection of different scales in many languages is available.
An analog indicator is always the best instrument in processes where dosing is effected by hand !

Datasheet FA 192 / FA 288 on request